The SAOCA Forum  

Go Back   The SAOCA Forum > Non Alpine Related Topics > Sunbeam Tiger
FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 1 Week Ago
modelafish modelafish is offline
First Gear
 
Join Date: Aug 2017
Location: Nampa, ID
Posts: 1
Default Need help with speedometer cable

This is about the Tigers distant cousin; my 69 TR6 with a 289 Ford V8. I bought the car in 1971, put the V8 in it in 1989, but have never had a functioning speedometer. I finally retired this year and started doing all the things that have been neglected, literally, for decades. It has the C4 automatic transmission, but it appears the connection is the same as with a standard. I have a Smiths speedometer in the dash with a fitting approximately 15/32 inch in diameter. What I need to know is if this is the same type of Speedo in Alpines, and therefore, if an Alpine speedo cable should work in my application. And then where to get them.
Reply With Quote
  #2  
Old 1 Week Ago
PROCRAFT PROCRAFT is offline
Third Gear
 
Join Date: Jan 2007
Location: INDIANA
Posts: 451
Default Speedo

Call these guys in Speedometer Service in Milwaukee WI. Roger ? the'll have the answer.
Reply With Quote
  #3  
Old 1 Week Ago
Paul A Paul A is offline
SAOCA Vice President
 
Join Date: Jan 2007
Location: Mitchell, SD
Posts: 906
Default

a good speedometer shop can make up a cable for you with the correct fittings. I had new cables for my two V6/T5 conversions made by APT in Bloomington, MN


APT INSTRUMENTS
9632 HUMBOLDT AVE S
Bloomington, MN 55431
Phone Number: (952) 881-7095
Web Address: www.gaugeguys.com
__________________
from sunny South Dakota,

Paul
Reply With Quote
  #4  
Old 6 Days Ago
Cactusmasher's Avatar
Cactusmasher Cactusmasher is offline
Third Gear
 
Join Date: Feb 2007
Location: Phoenix, Arizona in Deer Valley
Posts: 338
Default Tiger/non Sunbeam speedo cable

A suggestion for Darksiders trying to mate a Sunbeam speedometer to a Ford transmission....makes no difference if it's manual or automatic transmissions.

On my first one I used a Mustang (64 to 67 ) factory issue speedo cable and had a local speedo shop remove the Alpine cable transmission end and replace it with a Mustang piece and nut. Bolts right into a T5 transmission and with the stock Alpine speedo end, it worked very well.

On my second one, I used the Tiger 140 mph speedometer with the T5 and all it took to hook it up was a stock early Mustang speedo cable...bolted right up and worked fine.

Mustang cable was purchased through Musstang Classics out of their catalog for about $20. There are two different lengths of speedo cable and you want the longest one....the shorter one won't work....too short ( ask me how I know this ). The first cable modified by a speedo shop was about $15 to change out the speedo end of the cable.

I hope this information will be useful in curing some of your speedometer cable issues.
__________________
Cactusmasher
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 06:35 PM.


Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright SAOCA 2017 Website powered by Subdreamer CMS & Designed by indiqo.media